Welcome to KELIN! Provide solutions for your compressed air purification management needs.
Compressed Air Purifying Equipment
contact us
Home > Products > Small desiccant air dryer > Heatless Desiccant Dryer >

3.8Nm3/min Heatess regeneration air dryer for 30HP compressor

3.8Nm3/min Heatess regeneration air dryer for 30HP compressor

3.8Nm3/min Heatess regeneration air dryer for 30HP compressor
CategoriesHeatless Desiccant Dryer
AlbumView larger image
Flow capacity3.8m3/min
Nomal Inlet pressure7bar
Max. inlet pressure10bar
Pressure dew point-40°C
Purge loss14.5%
Vessel StandardChina GB, CE PED, ASME
Switch time5 mins (adjustable)
DesiccantActivated Alumina
Power supply220V-1phase-50hz
FOB portShanghai 、Ningbo
Terms of PaymentL/C, T/T
Update Time2019-09-18
Detail Information

CE  Heatess regeneration air dryer for 30HP compressor


KXD Series Heatless cmpressed Air Dryer is a kind of simple, reliable and economical method for removing water vapor from compressed air. The normal outlet pressure dew point is -40°C, lowest pressure dew point can be -70°C .

the KXD Series Heatless comprssed Air Dryer is ideal for applications where compressed air lines are exposed to blew zero ambient temperatures, or where special processes require air at an extremely low relative humidity. This unit provides instrument quality air and is designed for maximum reliability and long, trouble-free service.

the KXD Series Heatless regenerative Air Dryer is based on pressure-swing-adsorption technology. There are two desiccant towers filled with activated alumina, as saturated air flows up through the tower , its moisture content adheres to the surface of the activated alumina beads. The dry air is then discharged from the tower into the distribution system.

After 5 minutes of operation on one tower the flow is switched to the other tower through the use of a timed system of directional valves. A portion of dried compressed air is diverted through an orifice, expanded to atmospheric pressure, and directed into the regenerating tower, where the moisture accumulated during the drying cycle is stripped off and purged to the atmosphere.

Standard Features

Reliable Timed controller Field-proven over time, this design and technology maintain precise control over all switching and purge valve functions.

High quality desiccant High quality, extra quantities of activated alumina is respectively filled in each tower.

Pressure Gauges Located on each tower, provide visual indication of pressure during drying and regeneration processes.

Comprehensive presentation                                                                                  


  ModelFlow RateInlet/Outlet Connection    DimensionsWeight
m3/minCFMLmmW mmH mmkg


Delivery time
Generally 10~12 working days after the order confirmed

1) Custom package request is appreciate.
2) Standard package: Corrugate carton

Please send your message to us

Agree to use terms of service

Newsletter Signup: