1 Air cooled after cooler heat exchange \ evaporator Heat exchange in cold and dry in the primary role on the evaporator is cooled by way of compressed air carried by way of the cooling capacity (in terms of this in the largest percentage of users may be a waste of cold cold) and make this some of the cooling capacity to carry large quantities of cooling Our prime temperature steam compressed air, thus reducing cold and dry cooling system heat load mechanisms to reach energy savings. By contrast, low air temperature from your heat exchanger come to be collected, so that the exhaust pipe wall temperatures are lacking and won't appear simply because of condensation. Evaporator is cold and dry chapters of a key heat exchanger, compressed air needs on the evaporator cooling, a few of which water vapor condenses into liquid water cooled and discharged outside the machine, so that the compressed air that they are dry. Completed in the evaporator low pressure refrigerant vapor is between air and convective heat and mass transfer across the low-pressure refrigerant after throttling device liquid phase is situated the evaporator exactly where the refrigerant to your low pressure steam, particles absorption inside of the phase change along the heat in order for the compressed air cooling. 2 Air cooled dryercondenser, second condenser (straight into pre-cooling heat) Contained in the cold and dry becoming the condenser is most likely the ruthless compressor discharge refrigerant, steam superheated refrigerant into liquid refrigerant cooling, to ensure a continual cooling process can be executed. As the condenser discharge refrigerant inside the evaporator heat, including heat and draw power on the compression conversion over heat. Galileo Galileo) machinery, equipment industry, high-end brands - the ecu Quality (Galileo Galileo) machinery, equipment industry, high-end brands - European quality imported from Europe we continue to update heaps of different products, technologies, to be sure within your On the other hand the international advanced level, the creation of European technology company to sign up for us on the basis of innovation, which will make our products suitable for domestic use, better and long life for this product details and related information, have a look at our web site now the condensation of load is way more than the evaporator, the cold and dry sub-air-cooled condenser (air-cooled condenser) and water cooled (water-cooled condenser) two. Refrigerated air dryer secondary condenser (oh no- pre-cooling heat) with the heat exchange purpose of the slicer therefore the same, the main is between everywhere temperature heat exchanger is mainly compressed air heat exchanger, as you move second major us going for low-temperature condensation compressed air and refrigeration systems for cooling high-pressure part, to make sure that sufficient refrigerant for that cooling, thereby enhancing the machine's cooling efficiency, while avoiding odor machine condenser cooling the effect of high jumping machine or machine malfunction.